FAFA- display de 7 segmentos

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;
int sega = 2;
int segb = 3;
int segc = 4;
int segd = 5;
int sege = 6;
int segf = 7;
int segg = 8;

// the setup routine runs once when you press reset:
void setup() {
  // initialize the digital pin as an output.
  pinMode(led, OUTPUT);
  pinMode(sega, OUTPUT);
  pinMode(segb, OUTPUT);
  pinMode(segc, OUTPUT);
  pinMode(segd, OUTPUT);
  pinMode(sege, OUTPUT);
  pinMode(segf, OUTPUT);
  pinMode(segg, OUTPUT);
}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(segf, HIGH);   // turn the LED on (HIGH is the voltage level)
  digitalWrite(sege, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segg, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(sega, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segb, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segc, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segd, HIGH);   // turn the LED on (HIGH is the voltage level
 
  delay(2000);
 
//F
   digitalWrite(segf, LOW);    // turn the LED off by making the voltage LOW
   digitalWrite(sege, LOW);   // turn the LED on (HIGH is the voltage level
   digitalWrite(segg, LOW);   // turn the LED on (HIGH is the voltage level
   digitalWrite(sega, LOW);   // turn the LED on (HIGH is the voltage level
   delay(1000);               // wait for a second
 
  digitalWrite(segf, HIGH);   // turn the LED on (HIGH is the voltage level)
  digitalWrite(sege, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segg, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(sega, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segb, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segc, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segd, HIGH);   // turn the LED on (HIGH is the voltage level
 
  delay(100);
 
//A
  digitalWrite(segf, LOW);    // turn the LED off by making the voltage LOW
  digitalWrite(sege, LOW);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segg, LOW);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segb, LOW);
  digitalWrite(segc, LOW);
  digitalWrite(sega, LOW);
  delay(1000);               // wait for a second
 
 delay(100);
  digitalWrite(sege, HIGH);   // turn the LED on (HIGH is the voltage level
  digitalWrite(segf, HIGH);   // turn the LED on (HIGH is the voltage level)
  digitalWrite(segg, HIGH);   // turn the LED on (HIGH is the voltage level)
  digitalWrite(sega, HIGH);   // turn the LED on (HIGH is the voltage level)
 

}